Seamless Aluminum

5” and 6” K- Gutter (OGEE style) – This is the traditional aluminum rain gutter with the crown molding profile. We fabricate continuous gutter on location from one of our new machines, eliminating unsightly and problematic seams mid-run. We also use only the heaviest gauge aluminum (.032) for our gutters and all of the screws used to fasten the system are painted to match the gutter.

When fascia board is present, we hang the gutter using an internal hanger that cannot be seen from the ground. It clips into the gutter and we screw through it and into the fascia board with a wood grip screw (we NEVER use nails). Without fascia, other companies use straps that are nailed onto the shingle that the gutter hangs from. We believe that straps looks terrible, not to mention the fact that 200 nails through your roof are not the greatest form of leak prevention. Connecticut Gutter LLC takes it one step further and incorporates the “Mole” Hidden Hanger Attachment to use utilize straps without having them seen on the roof. All of this makes for a very clean and extremely sturdy gutter system.

Below you’ll find the available colors for our aluminum gutters.

Black Blue Red Green Bronze Brown Clay

Gray Ivory Wicker Cream Eggshell White

Half-Round Aluminum

5” and 6” Half-Round – The half-round system is a fabricated from 20 ft. sections of aluminum half-round gutter. We pop rivet each section tot the other, seal the seam with tri-polymer sealant and then hide the seam underneath a circle hanger or wrap-around strap, depending on the type of install. Seams are water tight and undetectable. This system looks fantastic on more traditional homes. They achieve a classic look and accent nicely. These gutter systems are readily available in white and brown, but can be airbrushed before installation by one of our techs to the custom color of your choice if you so desire.